On this page
  1. Start with the tool you use most
  2. Find the platform and the exact battery model
  3. Read volts, amp-hours and watt-hours in context
  4. Check whether the tool takes one battery or two
  5. Check weight and runtime against your job
  6. Compare the complete cost of a bare tool and a kit
  7. Check older packs before you build around them
  8. Make a plan for storage and the next purchase

Start with the tool you use most

A shared battery is useful if it fits the tools you need, runs for long enough and makes the total kit cheaper or easier to store. Start with the tool you use most, whether that is a mower, a hedge trimmer or a strimmer. Choose one you can handle comfortably and that does the job well. Then see which other tools you might realistically buy in the same system.

If you own a compatible battery and charger already, the bare tool is worth pricing. If you’re starting from scratch, a complete kit can be an easier comparison. In either case, write down the platform, exact tool model, battery model and charger. Work through the maker’s compatibility information before looking at listings that say a tool is 18 V or name the same brand.

Find the platform and the exact battery model

Two batteries with the same voltage can be built for different platforms. The brand name, voltage or colour helps you identify a range, but the manufacturer’s compatibility list is where you confirm what fits. Check the label on the pack you own and the model page or manual for the tool. Some businesses sell several ranges for different uses, including garden tools that take a different pack from their other tools.

For example, the Bosch DIY Power for All page describes the tools and batteries in that system. The Rotak mower cited below illustrates the separate question of how many packs a particular tool needs. Check the exact model and what the manufacturer authorises. Skip an uncertain third-party adapter and confirm the approved equipment before ordering a bare tool or charger.

What to check in a cordless listing
Listing detailWhat it tells youFollow-up
Platform and exact modelWhich system the tool is inConfirm the exact pack and charger
Voltage and capacitySystem rating and battery capacityCheck model approval and working weight
Tool only or kitWhether any charging equipment is includedCount the packs required to work
Coverage or runtimeManufacturer’s estimate under stated conditionsMatch the tested pack to the bundle

Read volts, amp-hours and watt-hours in context

Voltage describes the electrical system the tool and pack work in. Amp-hours, written Ah, describe the charge capacity. Within the same compatible platform, a higher-capacity battery can give you more use between charges and may add weight. Compare figures with the pack you intend to use. A heavier pack that’s fine in a mower can change the feel of a hedge trimmer held away from your body.

You may see watt-hours, or Wh, on a pack. Nominal volts multiplied by amp-hours gives a rough way to compare stored energy on paper. For example, 18 V multiplied by 4 Ah is 72 Wh. That calculation tells you nothing about whether the battery fits a tool. It also doesn’t predict how long two different tools will run. Grass growth, the cut you make and the tool’s power needs all affect useful running time.

Check whether the tool takes one battery or two

Read the instructions for the exact tool before assuming every tool in a system takes one pack. Some equipment uses two batteries at the same time. The Bosch Rotak example in the sources uses two 18 V packs. That means a spare pack has a different value if you need it to make the tool run in the first place. Check whether you need a matched specification and which combinations the instructions permit.

Think about the charger at the same time. Look at the number of packs it charges at once and the maker’s estimates for your exact battery capacity. If you mow and then use the trimmer, you might want to leave enough charge for both jobs or price a compatible spare. If you split jobs across different days, a single approved setup may suit you. For mower power choices, see corded versus cordless.

Check weight and runtime against your job

The right pack depends on how you use the tool. For trimming one short edge, a lighter compatible pack may suit you even if it runs for less time. For mowing several connected areas in one go, capacity may matter more. Find out which pack is fitted in the quoted operating weight and which the maker used in any coverage estimate. Read the conditions behind the estimate where they are available.

Plan around the job you repeat in a busy season. Include the grass you let grow between cuts and the walk to your charger. Charging time becomes important if you need to finish everything in one dry spell. Compare a slower charger you already own, a compatible faster charger and extra capacity in the context of the actual job. Our hedge trimmer guide explains why weight matters in a handheld tool.

Compare the complete cost of a bare tool and a kit

Write the bare tool price in one column and add the confirmed compatible packs and charger you need. In the other column, write the complete kit price and check that the batteries in the bundle are the ones you want. As a worked example, a £90 bare tool plus a £45 pack and a £25 charger would cost £160. A hypothetical £145 kit with a suitable pack and charger would win for a new buyer. Someone who already has both might prefer the £90 bare tool.

Check whether you can buy an approved replacement battery and charger independently. Read warranty and care terms for the tool and packs. Save the model and product numbers with the paperwork. If a label has worn away, use the spares identification guide to find another reliable way to check the version before ordering.

Check older packs before you build around them

If you’re adding a tool to a mature collection, look at the model number on the battery you have today and confirm it in the new tool’s documentation. Photograph the labels of packs and chargers that look alike. If a battery is worn and no longer lasts for the current job, price the replacement on its own and in bundles before counting it as a saving. Read the manufacturer’s guidance on battery condition and take a damaged pack to an appropriate service or collection point using the instructions for your area.

Make a plan for storage and the next purchase

Use the manufacturer’s storage and charging conditions for the battery and charger, and choose a spot that actually meets them. Read advice for damaged packs and disposal before you have a problem. Keep your shortlist to equipment you expect to use. Buying a system because it has dozens of tools is a weak saving if your only planned jobs are one small mow and a few minutes of edging.

For the next tool, repeat the compatibility check with its own model number. Give handling and the complete cost the same attention as you did for the first. Try our guides on small-garden mowers and cordless edging to check whether the work justifies the switch.