On this page
- Find out which boards you have
- Read the care instructions for the right range
- See why one pressure figure doesn’t cover every deck
- Start with the lightest method that fits the job
- If pressure washing is allowed, set it up for the board
- Treat a stain differently from general dirt
- Decide whether to buy, borrow or use a brush
Find out which boards you have
Some composite boards can be cleaned with a pressure washer under the maker’s stated conditions. Others need a gentler method. Start with the exact range and, if possible, when it was fitted. Guidance can vary across different generations of decking from one manufacturer. A quick look at the finish or grooves rarely tells you enough to choose a cleaning method on its own.
Look for the invoice, installation pack, leftover board or product code. If you bought the house with the deck already fitted, ask the seller or installer if you have a way to contact them. A photo can help describe the boards, especially alongside paperwork or a label. If you can’t identify them, avoid assuming that the instructions for a similarly coloured board apply. Start by clearing loose debris with a soft broom and seek guidance for any further cleaning.
Read the care instructions for the right range
Check the manufacturer’s care page and the terms that apply to the exact range and installation. Look for its advice on ordinary dirt and for the particular mark you have, whether that’s green growth, a rust mark under furniture or a greasy patch where the barbecue sits. A general cleaning method and a stain treatment can use different products. Use a treatment you can identify as suitable for the decking rather than trying several at once.
Where the maker permits pressure washing, read the conditions together. The permitted machine pressure, fan nozzle, distance and cleaning solution form one set of instructions. The maximum pressure is a limit for the stated setup. A model whose adjustment and nozzle you can verify is easier to judge than a washer chosen from one figure on its box. Check for restrictions around trim, joints and surface damage before you begin.
| What you can confirm | Useful next step | Check before cleaning |
|---|---|---|
| Maker and range are known | Use their care guide | Pressure, nozzle and distance if permitted |
| Maker rules out pressure washing | Use the approved manual method | Brush, cleaner and rinsing instructions |
| Boards are unidentified | Clear loose debris gently | Find the invoice, installer or product code |
| A stubborn spot keeps returning | Identify the mark and its cause | Product-specific stain advice |
See why one pressure figure doesn’t cover every deck
Trex gives specific washing instructions for certain ranges, including requirements for the nozzle and distance. Its separate care guide for traditional composite products advises using a different cleaning method and warns that pressure washing can damage their surface. Millboard publishes a different set of requirements for its own decking. These are good reasons to find your board’s care guide before looking for a generic pressure recommendation. The pressure rating of a patio washer alone says little about what that spray will do to an unfamiliar board.
If a friend offers to lend you a washer, look up the exact model, the attachments it comes with and how its pressure control works. Read the care guidance alongside the machine manual. If you can’t establish that the combination meets the board maker’s limits, use the approved manual method instead. For a separate paved area, our pressure washer buying guide shows how to compare flow, pressure, accessories and hose reach.
If you have a deck repaired with newer boards, confirm what’s fitted in both parts before cleaning across the join. Similar colour and profile can hide an important difference in the care instructions. If you can’t confirm both sets of instructions, check with the installer and start with a method that suits the boards you can identify.
Start with the lightest method that fits the job
Move light furniture and plan where loose material and cleaning water will go. Clear leaves and grit with equipment appropriate for the decking. Check the maker’s recommendation before using a brush, detergent or cleaner on the surface. Follow its directions for rinsing and where to work first. A small clean in an unobtrusive spot, where the instructions allow it, helps you check the finish before treating a more visible area.
If the problem is a few dirty patches under planters, look at what is leaving the mark. You may be able to remove loose dirt and deal with the affected spots without setting up a washer for the whole deck. If debris repeatedly collects in certain gaps, check that it can be removed using the maker’s advice. Our guide to clearing wet leaves compares ways to clear loose material from outdoor surfaces.
If pressure washing is allowed, set it up for the board
Choose a dry, suitable working period and check footing on the deck. Read the washer manual, including electrical and water supply instructions, and keep the spray away from electrical equipment and people. Use the nozzle and method the board maker permits. If the instructions call for a fan tip, verify which one you’ve fitted before starting. Avoid substituting a patio cleaner or a focused rotary nozzle just because it came in the box.
Begin where the manufacturer suggests, or use a discreet spot within its permitted method. Check what happens at board ends, around fittings and beside neighbouring surfaces. Stop if you notice lifting, surface damage or a change you can’t explain. Get advice from the installer or maker before treating more of the deck. If you are comparing equipment for use on several surfaces, use the pressure washer checklist once you know what the boards allow.
Treat a stain differently from general dirt
Mud from shoes, a film from pots and a spill from an outdoor table can call for different care. Identify the mark and look for a matching instruction. The board manufacturer may specify a cleaner or explain how to rinse it. Check those directions for the exact finish. A stronger jet can damage a surface without solving the problem that caused the stain, so identify what you’re cleaning before increasing force.
For recurring patches in a damp corner, check where water sits and whether leaves or furniture slow drying. Clean within the maker’s instructions and look at ways to keep that area clear. For a raised deck with runoff onto a path or shared space, plan how you will handle the water and keep people away while the surface is wet. If boards are loose, damaged or slippery enough to cause concern, address that problem before trying to deep-clean around it.
Decide whether to buy, borrow or use a brush
If the only job is a small deck and the manufacturer gives a workable brush-and-rinse method, price the suitable cleaning tools before paying for a pressure washer. If you also clean a broad area of paving that can take that method, size the machine for those jobs and verify how you would use it on each surface. Make space for any accessories you genuinely expect to use.
Keep a note of the decking range and the care page so you can repeat the check when you next clean it or swap machines. If you’re still unsure what the boards are, start gently and keep looking for the product details. Once you have a confirmed method, buy or borrow equipment around it. It’s easier to choose a tool when you know the surface you need it to look after.