On this page
- Choose for the surface you clean most often
- Read pressure and water flow together
- Match the attachment to patio, decking, car or furniture
- Measure both hoses and the route to power
- Compare mains, portable and petrol around access
- Find the complete kit and plan winter storage
- Do you need a rotary nozzle or a specialist cleaner?
- Use a one-job shortlist
Choose for the surface you clean most often
Start with the area that makes you want a pressure washer. An open paved drive calls for reach and a way to cover the area evenly. A car, a bike or a small balcony asks for more control and care around sensitive parts. If you have several jobs in mind, use the most frequent one to decide what to buy and check the instructions for the most delicate surface before you choose attachments.
Look for the surface maker’s care instructions before treating the washer as an all-purpose cleaner. Timber, composite decking and soft or damaged masonry can have specific limits. A hand brush and water may be the first step, and some surfaces should only be cleaned by methods the manufacturer lists. Check how runoff will leave the area and whether there’s enough space to work without spraying people, neighbouring property or electrics.
Read pressure and water flow together
Pressure, expressed in bar, is one part of how the washer cleans. Flow tells you how much water it supplies in a period of time, often in litres per hour. Higher flow can help rinse a broad surface. An adjustable spray helps you scale back force when a surface needs care. Ratings only tell you part of the story because the nozzle and setup change how the stream meets the surface.
Compare working figures with working figures and maximum figures with maximum figures if the manufacturer lists both. As a unit check, 420 litres per hour is 7 litres per minute. That’s a way to read the specification, and the volume used for a job also depends on how long the trigger is held. Check the exact model’s input requirements and permitted settings. You’ll get more from a controllable washer with the right accessory than from choosing on a maximum bar number alone.
| Job | Prioritise | Check first |
|---|---|---|
| Sound paving | Even coverage and enough hose | Surface and joint instructions |
| Car or bike | Adjustable spray and reach | Vehicle maker’s cleaning guidance |
| Timber or composite boards | Manufacturer-approved method | Exact board or finish |
| Quick rinse away from mains | Portable supply and working time | Water source and refill effort |
Match the attachment to patio, decking, car or furniture
For sound paving that the supplier says can be pressure washed, a compatible patio cleaner can help you cover area more evenly and manage splashback. Look at the type and condition of joints before going near them. A focused jet on a damaged surface can create a repair job. Check the cleaning guidance and whether you need to replace jointing material after cleaning.
For decking, identify the actual boards. Early and newer composite ranges can have different instructions, even from one manufacturer. For treated timber, check the board or treatment supplier’s directions. If you can’t identify the material, a gentle method is a better first step while you check. For vehicles, follow the vehicle maker’s cleaning instructions and pay attention to seals, electrical components and sensitive coatings. Check the washer’s manual before using a detergent or attachment for a particular material.
Measure both hoses and the route to power
A long supply hose doesn’t fix a short high-pressure hose. Picture where the washer will stand and measure to the furthest corner of the job. Add space to go round parked cars, furniture or a corner in the path. Decide whether you can move the unit safely partway through or want enough working hose to reach from one place. A reel can help with storage if the connections stay accessible.
Read the manual for permitted water sources, minimum supply and the fittings required. If you want to draw water from a butt or tank, verify that the model supports it and what inlet hose or filter it needs. For an electric washer, follow the maker’s connection and RCD advice and keep electrics away from spray. Check current restrictions with your water supplier if they apply. If your source or route is unsuitable, pause the purchase until you have a workable setup.
Compare mains, portable and petrol around access
A mains unit is a practical starting point for a home patio or driveway where you have a suitable tap and power. Compact cordless or portable cleaners can be convenient for light rinsing away from those connections. Read what they can clean, their water source and their operating time. If you’re choosing one because you don’t have a tap outside, confirm how you’d carry or refill the water for the full job.
Petrol machines can make sense for sustained work away from mains power, with the added weight, fuel, noise and servicing to account for. For an occasional domestic clean, compare the cost and storage of a machine with borrowing or hiring one that suits the surface. If the work is extensive or the surface is delicate, consider whether hiring a suitable service would give you better results than buying a more powerful washer.
Find the complete kit and plan winter storage
Compare the exact models and bundles. A similarly named kit can include a different length of hose, patio attachment or detergent system. Price any connections, approved extensions and the attachment you’ll need first. Check which common parts are replaceable and where to find the product number. Our garden-tool spares page explains how to check parts information before ordering.
Allow room for the unit, hose and accessories, as well as the route you’ll take to get them out. Follow the maker’s shutdown and storage steps, including draining and protection from frost where it specifies. A compact unit that is awkward to coil up can cost more time than you gain in cleaning. Picture the five minutes after you finish while you’re choosing a model.
Do you need a rotary nozzle or a specialist cleaner?
A rotary nozzle concentrates the work in a small area and can be too aggressive for some surfaces. Treat it as a tool for a suitable job that the manual and surface instructions both allow. For a large patio, check whether a compatible surface cleaner is available before deciding based on the nozzles in the box. For a more delicate finish, control at a suitable setting matters more than collecting attachments. A nozzle you can buy separately also lets you start with a smaller kit and see what you actually use.
Use a one-job shortlist
For one small area of sound paving, check the care instructions, measure the route to it and compare a domestic adjustable washer with a compatible surface attachment. If you’re mainly cleaning a car and rinsing furniture, start by checking manufacturer-approved methods, spray control and hose reach. If your work is split between masonry and composite decking, keep the two cleaning methods separate and match the washer to the job it can do safely.
Take the measurements and surface notes to our pressure washer checklist. Compare the whole kit and the time it will take to set up and put away. If you’ll use it once a year after heavy weather, check the cost of a hire and the storage you’d give up before paying for extra power.