On this page
  1. Look at the grass and the ground separately
  2. What a scarifier can remove
  3. What hollow tines do in compacted soil
  4. Read the attachment description rather than the badge
  5. Work around the season and soil condition
  6. Try the decision on two real-sized lawns
  7. Finish the shortlist with one job and two measurements

Look at the grass and the ground separately

You may notice the problem when the mower wheels sink in one spot or the lawn feels springy underfoot. Look between the grass blades. A thick layer of old stems and debris at the soil surface suggests a problem a rake or scarifier can address. A bare, hard strip that takes much longer to absorb rain than the rest of the lawn is a reason to look at the soil and how the area gets used.

Pick one place where the lawn looks healthy and one where it struggles. Compare what you can see at the base of the grass and note where there has been regular foot traffic. If the same corner stays wet after rain, record whether it is a low point, a route people use or an area that also receives water from paving. The wet-lawn guide helps you judge when the surface is ready to work on.

What a scarifier can remove

Scarifying removes some accumulated thatch from the surface. If you have a small patch with a loose layer of material, a spring-tine rake may let you deal with it and see how the grass responds. Work within the RHS timing advice for your lawn. An area that looks thin because the ground stays wet or the grass gets little light may need its cause looked at as well as the debris at the surface.

If a broad lawn is covered in the same layer, look at powered machines by the job their cartridge is designed to do. Some use flexible tines for raking and others use blades for a more vigorous treatment. Read the instructions for the fitted cylinder. Check the range of working depths, the maker’s advice on ground condition and how you change settings. A machine advertised for two jobs is useful when its supplied attachments actually suit the jobs you have.

Match the tool to what you find
What you noticeStart withCheck next
Loose, matted layer over a small patchSpring-tine rakeCan the grass recover in these conditions?
Thatch across a larger lawnSuitable powered scarifierAttachment, depth and waste collection
Firm, heavily used stripFork or manual hollow-tine aeratorCompare the affected area with nearby soil
Repeated pooling in a low spotInvestigate drainageCheck where the water is coming from

What hollow tines do in compacted soil

A hollow-tine tool lifts out small plugs of soil, leaving openings where the grass roots can get more air and water. This differs from pressing solid spikes into the ground. The RHS suggests hollow tines as a useful option for compacted clay or lawns affected by waterlogging. First work out whether the soil is compacted and wait until conditions suit the work. Aeration alone may have limited effect when water runs into a low part of the garden from elsewhere.

For a short route that regularly gets walked on, compare a garden fork with a manual hollow-tine tool. A fork is useful if you already own one and want to deal with a small area. Hollow tines make sense if you want to remove soil plugs. Compare the tread, handle, ability to clear the tines and how you would gather the plugs. If the affected area is broad, consider hiring a machine that is specifically designed to take cores.

Read the attachment description rather than the badge

The word aerator can be used for several types of work. A cartridge with spring tines may work at the surface, while a coring aerator is designed to remove plugs from the soil. Find the instructions or diagram for each attachment before buying. If the job you need to do is relieve compaction at depth, check that the model can core or that you have a separate tool for that part of the lawn.

For powered equipment, compare the weight, working width and height adjustments for the fitted attachment. Check whether the cylinder, collector or pack you want comes with the exact package. Add batteries and a charger to the price if needed. Use our battery systems guide to check the pack you already own, and check spare-part compatibility if you want to replace an existing cartridge.

Work around the season and soil condition

Choose a time when the grass can recover and the ground is suitable for the treatment. The RHS autumn guidance describes how to choose the work your lawn needs and when it’s generally done. If you’re pricing tools in November and the ground is wet, you can use the time to make a shortlist. Wait for the soil and grass to reach suitable conditions before using a machine, and follow the manual’s instructions on weather, setup and protective equipment.

Plan what you’ll do with the material you take out. Scarifying can leave a surprising amount to gather, especially if the lawn has accumulated moss or debris for a while. Hollow-tining leaves plugs to collect or deal with in line with the care method you’re following. Before hiring a wide machine, check how you’ll carry the material off the lawn and whether you have somewhere to put it. A short walk to the compost or bin can change what feels manageable.

If you’re considering top dressing after aerating, check the RHS guidance for your soil and lawn first. Choose the material and timing for the problem you’ve identified. When drainage needs more investigation, keep a record of where water pools and how long it stays before committing to a routine or buying more attachments.

Try the decision on two real-sized lawns

Picture a small back lawn with a worn strip between the steps and the washing line. The rest drains well and the grass is easy to cut. Check the ground in the strip and the route people take through it. A fork or manual corer could be a sensible first choice for that area if compaction is the issue. If more water is flowing across it from a path, look at the drainage problem before paying for a bigger tool.

On a level lawn with an obvious surface layer across most of the grass, work out whether a rake would be manageable or whether a suitable scarifier would save enough time. For a single renovation job, price hire and check access as well as the tool’s working width. The small-garden mower guide has a useful method for measuring gates and storage space that also applies to lawn renovation kit.

Finish the shortlist with one job and two measurements

Write the job in one line, such as removing a surface layer from the back lawn or taking cores from the compacted strip. Measure the affected area and the narrowest opening you need to pass through. If the symptoms point to both problems, decide which area needs which work and check when the lawn can recover. You can buy or hire for the job you’ve identified once you know the exact attachment and route.

If the lawn repeatedly becomes waterlogged or the problem stretches beyond the turf, record what happens during rain and use the RHS drainage guidance to investigate. Choose equipment once you understand the conditions you’ll be working in. A well-chosen hand tool and a manageable patch can be a better starting point than treating the entire lawn as one job.